PE Pipe Extrusion Line

1.PE pipe extrusion line introduction

S (standard) series extrusion equipment is a new type pipe extrusion equipment successfully designed by our company on the basis of absorbing the European advanced technologies, which is suitable for the high speed extrusion of PE, PP, PB, PE-RT polyolefin pipes. This equipment is equipped with 36:1 extra long L/D ratio extruder, with the advantages of chip free cutting, high efficiency and high speed, beautiful appearance, high automation degree, stable and reliable production. It has won the popularity from the customers for its world class performance but with lower price, and it also can provide large diameter inner and outer layer composite and multi-layer composite pipes, which is the best choice for replacing the imported equipment. Our company has successfully researched and developed the pipe extrusion equipment with the largest diameter of Ф2500mm according to the market needs. Meanwhile, this kind of equipment can produce agricultural irrigation, heat preservation pipe, external protection pipe and other thin-wall pipes.

G (high-end) series extrusion equipment is our company’s newest PO pipe solutions, equipped with 36-40 super length diameter ratio extruder, with the advantages of servo traction control, chip free circular cutting, high efficiency, high speed, high automation, energy saving and protection. Our company has successfully researched and developed the pipe extrusion equipment with the largest diameter of Ф2500mm according to the market needs. In addition to the conventional pipe production, it can also satisfy many special requirements such as super thick wall pipe and multi-layer composite pipe according to different configuration schemes.

U (North American high-end) series extrusion equipment is the latest series of products developed and manufactured by our company according to the North American standard high-end configuration, adopting the latest European advanced technology, aiming at the demand and operation habits of the North American market. It is the latest PO pipe solution in the North American market, equipped with 36-40 super long diameter ratio extruder, European brand servo traction control and heavy duty chip free circular cutting. It has the advantages of high efficiency, high speed, high automation, energy saving and environmental protection. According to the North American market demand, our company has successfully developed a complete set of pipe extrusion equipment with the maximum diameter of Ф 2500mm. In addition to the conventional pipe production, it can meet various special requirements such as super thick wall pipe and multi-layer composite pipe according to different configuration schemes.

2.PE pipe extrusion line parameter

S (standard) series extrusion equipment

ModelProduction pipe range( mm )Production Output( kg/h )Production pipe speed( m/min )Center height( mm )Overall dimension( m )Control system
PE32S-22×Φ16～Ф32400～4502×1.5～35100045×3.8×1.8 Programcomputercontrol
PE63S-22×Φ16～Ф63400～4502×1.0～25100048×3.8×1.9
PE63SФ16～Ф63400～4501.5～30100045×3.1×1.9
PE160SФ20～Ф160400～4501.0～20100038×3.2×2.0
PE250SФ50～Ф250550～6000.5～10100048×3.3×2.2
PE315SФ75～Ф315550～6000.2～6.0100050×3.4×2.3
PE450SФ90～Ф450800～9000.2～5.0110052×3.5×2.7
PE630SФ160～Ф630800～9000.1～2.0110058×3.6×2.8
PE800SФ315～Ф8001250～14000.05～1.5120062×3.6×3
PE1000SФ400～Ф10001250～14000.03～1.0140065×3.6×3
PE1200SФ500～Ф12001500～16000.03～0.6160075×3.8×3
PE1600SФ710～Ф16001500～16000.02～0.4180080×4×3.2
PE2000SФ1000～Ф20001800～20000.02～0.3220085×4.5×4.8
PE2500SФ1400～Ф25001800～20000.01～0.2300088×4.8×5.0

G (high-end) series PE polyethylene pipe high speed high efficient extrusion equipment

ModelProduction pipe range( mm )Production Output( kg/h )Production pipe speed( m/min )Center height( mm )Overall dimension( m )Control system
PE32G-22×Φ16～Ф32400～4502×1.5～35100045×3.8×1.8Programcomputercontrol
PE63G-22×Φ16～Ф63400～4502×1.0～25100048×3.8×1.9
PE63GФ16～Ф63400～4501.5～30100045×3.1×1.9
PE160GФ20～Ф160400～4501.0～20100038×3.2×2.0
PE250GФ50～Ф250550～6000.5～10100048×3.3×2.2
PE315GФ75～Ф315550～6000.2～6.0100050×3.4×2.3
PE450GФ90～Ф450800～9000.2～5.0110052×3.5×2.7
PE630GФ160～Ф6301250～14000.1～3.0110060×3.6×2.8
PE800GФ315～Ф8001250～14000.05～1.5120062×3.6×3
PE1000GФ400～Ф10001500～16000.03～1.0140067×3.6×3
PE1200GФ500～Ф12001500～16000.03～0.6160075×3.8×3
PE1600GФ710～Ф16001500～16000.02～0.4180080×4×3.2
PE2000GФ1000～Ф20001800～20000.02～0.3220085×4.5×4.8
PE2500GФ1400～Ф25001800～20000.01～0.2300088×4.8×5.0

U (North American high-end) series PE polyethylene pipe high speed high efficient extrusion equipment

ModelProduction pipe range( mm )Production Output( kg/h )Production pipe speed( m/min )Center height( mm )Overall dimension( m )Control system
PE32U-22×Φ16～Ф32400～4502×1.5～35100045×3.8×1.8 Programcomputercontrol
PE63U-22×Φ16～Ф63400～4502×1.0～25100048×3.8×1.9
PE63UФ16～Ф63400～4501.5～30100045×3.1×1.9
PE160UФ20～Ф160400～4501.0～20100038×3.2×2.0
PE250UФ50～Ф250550～6000.5～10100048×3.3×2.2
PE315UФ75～Ф315550～6000.2～6.0100050×3.4×2.3
PE450UФ90～Ф450800～9000.2～5.0110052×3.5×2.7
PE630UФ160～Ф6301250～14000.1～3.0110060×3.6×2.8
PE800UФ315～Ф8001250～14000.05～1.5120062×3.6×3
PE1000UФ400～Ф10001500～16000.03～1.0140067×3.6×3
PE1200UФ500～Ф12001500～16000.03～0.6160075×3.8×3
PE1600UФ710～Ф16001800～20000.02～0.5180082×4×3.2
PE2000UФ1000～Ф20001800～20000.02～0.3220085×4.5×4.8
PE2500UФ1400～Ф25001800～20000.01～0.2300088×4.8×5.0

3.PE pipe extrusion line details